Enigma2 takes IPTV as a bouquet file placed in /etc/enigma2/ over the network, not as a playlist URL. Your provider supplies the bouquet. You upload it with FTP, add a line to bouquets.tv, and restart the GUI. The IPTV channels then appear in the same list as your satellite channels.
What you need to know
- Enigma2 loads IPTV as a bouquet file, not as an M3U playlist in an app.
- You need the receiver's IP address, an FTP client such as FileZilla, and the bouquet file from your provider.
- The file goes in
/etc/enigma2/and must be listed inbouquets.tv. - Restart the GUI afterwards. A full reboot is not needed.
- The steps are the same on Dreambox, Zgemma, VU+ and other Enigma2 boxes.
- Setup takes about 15 minutes.
What is an Enigma2 bouquet?
A bouquet is a channel group you scroll through with the remote. An IPTV bouquet is a text file in the same format, with internet addresses in place of satellite tuning data.
Once installed, the IPTV channels are part of the receiver's own channel list. There is no separate app to open and no second interface to learn, which is why this setup lasts longer than a playlist in an app.
How to upload an IPTV bouquet in 6 steps
Connect to the receiver with FTP, upload the bouquet to /etc/enigma2/, add it to bouquets.tv, and restart the GUI. You need the box's IP address and an FTP client. FileZilla is free and widely used.
Find the receiver's IP address
Open Menu → Setup → System → Network and write it down.
Connect with FTP
Host: the IP address. User:
root. Password: the one you set, or blank on many images. Port: 21.Go to /etc/enigma2/
This folder holds the channel data.
Upload the bouquet file your provider sent
It is usually named
userbouquet.something.tv. Contact us if you need one issued for your subscription.Edit bouquets.tv
It is in the same folder. Add a line that references the new file, in the same format as the lines already there. Without this line, the file is on the box but does not show.
Restart the GUI
Open Menu → Standby/Restart → Restart GUI. A full reboot is not needed, because the interface reloads the channel list when it restarts.
Check the bouquets.tv line first. The file being there is not enough: the index has to reference it, and the name must match exactly, including the extension.
Which receivers does this work on?
Every Enigma2 receiver. Enigma2 is the software, not the hardware, so the steps are the same across the family.
- Dreambox, the original and still the most common search term.
- Zgemma, including the H9 and H7.
- VU+, including the Solo, Duo and Ultimo.
- Octagon, Mutant, Edision and other Linux receivers.
Menu wording varies slightly between images such as OpenATV and OpenPLi, but the file locations stay the same.
Is IPTV on Enigma2 worth it?
Yes, if you already own an Enigma2 receiver. No, if this is your first IPTV setup.
- Satellite and IPTV channels sit in one list, on one remote.
- It keeps working: there is nothing to update and no app to break.
- FTP and a text file are far more work than pasting a URL into an app.
- Every change to the line-up means another upload.
If you are choosing a device, see all the devices compared.
Frequently asked questions
How do I add IPTV to a Dreambox?
Upload the bouquet file your provider supplies to /etc/enigma2/ with FTP, add a line referencing it in bouquets.tv in the same folder, then restart the GUI. The channels appear in the normal channel list next to your satellite channels.
Can Enigma2 use an M3U playlist?
Not directly in the channel list. Some images have plugins that read a playlist, but a bouquet file is the standard method and the more reliable one, because it makes the IPTV channels part of the receiver's own list.
I uploaded the file but no channels appeared. Why?
The bouquets.tv index was not edited. Enigma2 does not scan the folder: it reads that index, so a bouquet file that is not listed there stays hidden. Check that the filename in the index matches exactly, including the extension, then restart the GUI.
What is the FTP password for my receiver?
The one set when the image was installed. Many images ship with the user root and no password, which is fine on a home network and worth changing if the box can be reached from outside it.
Does this work on Zgemma and VU+?
Yes. Enigma2 is the software, so Dreambox, Zgemma, VU+, Octagon and the rest use the same file locations and the same steps. Only the menu wording differs between images.